Hotline 0904251826

Bộ lập trình PLC Kinco KS101M-04DX

912 lượt xem
Bộ lập trình PLC Kinco KS101M-04DX
  • Bộ lập trình PLC Kinco KS101M-04DX (4*DI, 1 Ethernet, 2 CAN ,1*RS232, 1*RS485)
  • Significant savings in installation space:

Thin plate compact design, thickness less than 25mm, can be installed in a small electrical cabinet.

  • Higher computing speed:

Adopt new MCU platform, 1000 bit instruction scan cycle is 0.25ms, can reach the same kind of small PLC first-class level.

  • Built-in CANopen interface:

KS105C1 and KS105C2 built-in CAN interface, which supports CANopen master station and slave station and CAN free protocol. With convenient motion control instruction library, it provides more cost-effective choice for multi-axis application occasions.

  • 4-channel high-speed pulse counter:

Provide 4-channel high speed pulse counter with maximum counting frequency of 200K. Each high-speed counter allows up to 32 PV values to be configured and supports 32 CV=PV interrupts. High-speed counter support a variety of modes, can be carried out single phase, double phase (Up/Down), AB phase (1 times frequency and 4 times frequency) count. Users can use the HSC configuration wizard in the programming software to configure visually.

  • 4-channel high-speed pulse output:

Provide 4-channel high-speed pulse output, both support PTO (pulse train) and PWM (pulse width modulation) mode output. Three of channels output frequency up to 200 KHz (load resistance is not greater than 1.5 K Ω), the other one output frequency is 10KHz；The software provides PLS (PWM or PTO) positioning control instruction group PFLO_F (follow instruction) and so on, which facilitates the user to realize simple motion control application.

  • Serial ports of communication:

Provide 1 RS232 and 1 RS485 Serial ports, Named PORT0 and PORT1 respectively, the highest communication baud rate is 115.2Kbps；PORT0 can be used as a programming port, and also supports Modbus RTU slave station protocol and free communication. PORT1 can be used as both programming port and Modbus RTU master station slave station protocol and free communication.

  • Extension modules are available as Modbus slaves:

The RS485 interface of the extended module can be used as a Modbus slave station to provide more cost-effective solutions for more applications.

Chia sẻ:

Bộ lập trình PLC Kinco KS101M-04DX (4*DI, 1 Ethernet, 2 CAN ,1*RS232, 1*RS485)

Kinco KS Series PLC is a small integrated PLC, is the company launched high-performance wafer products.

KS Series PLC in the continuation of the K5, K2 series of rich functions, high performance and high reliability of the premise, the use of higher performance CPU. It also provides functions closer to users’ needs, such as built-in CAN bus interface, high performance high-speed input and output, compact installation, and rich extension modules. It CAN also meet the needs of users in various applications.

Thông số kỹ thuật

CPU module
Model Order number Specification
Supply voltage DI DO Extension module High speed input High speed output COM port Dimension (L*W*H) (unit:mm)
KS101 KS101M-04DX DC 24V 4 None Up to 14 2*up to 200KHz
Single phase and AB phase		 None 1*Ethernet

2*CAN

1*RS232
1*RS485 up to 115.2kbps

 100*84.5*25.4
KS105 KS105-16DT 8 8*transistor 4*up to 200KHz
Single phase and AB phase		 3*up to 200KHz
1*up to 10KHz		 1*RS232
1*RS485 up to 115.2kbps
KS105C1-16DT None 1*CAN
1*RS232
1*RS485 up to 115.2kbps
KS105C2-16DT Up to 14 2*CAN
1*RS232
1*RS485 up to 115.2kbps

 

KS Series Extension module
Model Order number Specification
Supply
voltage		 DI DO AI AO COM port Dimension (L*W*H) (Unit:mm)
KS121 KS121-16DX DC 24V 16 None 1*RS485, able be a slave station 100*84.5*25.4
KS122 KS122-14DT None 14*transistor None
KS122-12XR None 12*relay None
KS123 KS123-14DR 8 6*relay None
KS133 KS133-06IV None 4 2
KS131 KS131-04RD 4-channel thermal resistance input, two or three wire system, PT100, PT1000, Cu50, R.
Item Module Type Input Points Output Points Input Type Output Type Downloads Price (USD) Quantity Discounts More

KS101M-04DX

 CPU 4 N/A N/A N/A Spec Sheet (PDF) Software Download 0
view here
IMPORTANT NOTE: When stock status reads "contact us," the lead time could range from 6 to 16 weeks, model dependent. Please contact the factory for more details.
  • Thông tin đặt hàng

4*DI, 1 Ethernet, 2 CAN ,1*RS232, 1*RS485

TOP
0904251826